What is a Vibration Absorber?
Vibration absorbers are designed to reduce the amount of vibration and shock transferred through a tennis racket. They are typically made of rubber and are designed to fit inside the racket handle. Although not as common as they once were, vibration absorbers can still be found on many tennis rackets today.
What are the Benefits of Vibration Absorbers?
Vibration absorbers are beneficial for a number of reasons. They reduce the amount of shock that is transferred to the arm and shoulder, helping to reduce the risk of injury. They also help to improve the feel of the racket when it is hit, as well as providing a better response from the strings. Finally, they help to improve the accuracy of the shot, as they reduce the amount of vibration that is sent back to the hand.
How to Put a Vibration Absorber on a Tennis Racket?
The process of putting a vibration absorber on a tennis racket is relatively simple. The first step is to remove the existing handle grip. This can typically be done by peeling the grip off, or by using a grip remover.
Step 1: Prepare the Handle
Once the grip is removed, the handle should be thoroughly cleaned to ensure that it is free of any dirt, dust, or debris. This can be done by wiping down the handle with a damp cloth.
Step 2: Insert the Vibration Absorber
Once the handle is clean, the vibration absorber can be inserted into the handle. It is important to ensure that the absorber is inserted correctly and that it is fully seated in the handle. If it is not inserted correctly, it may not be able to absorb the shock and vibration properly.
Step 3: Secure the Vibration Absorber
Once the vibration absorber is inserted into the handle, it should be secured with a small piece of tape. This will help to ensure that it stays in place and does not come loose during play.
Step 4: Replace the Grip
Once the vibration absorber is secured, the grip can be replaced on the handle. It is important to ensure that the grip is tightened securely, as this will help to ensure that the vibration absorber remains in place.
Step 5: Test the Vibration Absorber
Once the grip is replaced, the vibration absorber can be tested by hitting a few shots with the racket. If the absorber is working correctly, the racket should feel more responsive and the shock should be significantly reduced.
Additional Tips for Vibration Absorber Installation
- Check the fit: Before installing the vibration absorber, it is important to ensure that it is the correct size for the handle. If it is too large or too small, it may not be able to absorb the shock and vibration properly.
- Replace regularly: Vibration absorbers should be replaced periodically, as they can wear out over time. It is best to replace them every few months to ensure that they are working as effectively as possible.
- Use lubricant: If the vibration absorber is difficult to insert into the handle, a small amount of lubricant can be used to help make the process easier.
Conclusion
Installing a vibration absorber on a tennis racket is a relatively simple process. By following the steps outlined above, it is possible to install a vibration absorber quickly and easily. Doing so can help to significantly reduce the shock and vibration that is transferred to the arm and shoulder, while also improving the feel and accuracy of the shot.